Air Temperature Sensor Replacement - Upper Right

REMOVAL PROCEDURE




1. Remove the right sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
2. Remove the IP compartment.
3. Remove the body control module and the HVAC programmer from the brackets and lay aside.
4. Remove the electrical connector from the right air temperature actuator.
5. Remove the right air temperature actuator retaining screws (1).




6. Remove the right air temperature actuator.

INSTALLATION PROCEDURE




1. Install the right air temperature actuator.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the right air temperature actuator retaining screws (1).

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

3. Install the electrical connector to the right air temperature actuator.
4. Install the body control module and the HVAC programmer into the appropriate brackets.
5. Install the IP compartment.
6. Install the right sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
7. Recalibrate the actuators. Refer to BCM Programming/RPO Configuration in Body Control Module System.