Removal and Replacement

REMOVAL PROCEDURE




1. Open the hood.
2. Remove the thumb screws (4) that retain the headlamp (3) to the headlamp bracket (1).
3. Pull the headlamp (3) forward in order to disengage the rear retaining pin (2).




4. Remove the headlamp (1) from the vehicle.
5. Disconnect the electrical connectors.

NOTE: Refer to Avoid Touching the Bulb in Service Precautions.

6. Turn the headlamp bulbs (2, 3, 4) counterclockwise in order to remove the bulbs.

INSTALLATION PROCEDURE




1. Turn the headlamp bulbs (2, 3, 4) clockwise in order to install the bulbs.
2. Connect the electrical connectors.
3. Install the headlamp (1) to the vehicle.




4. Press the headlamp (3) rearward in order to engage the rear retaining pin (2).
5. Install the thumb screws (4) in order to retain the headlamp (3) to the headlamp bracket (1).
6. Close the hood.