Air Temperature Switch Assembly Replacement - Right

AIR TEMPERATURE SWITCH ASSEMBLY REPLACEMENT - RIGHT

REMOVAL PROCEDURE




1. Remove the right IP trim plate. Refer to Trim Plate Replacement IP Accessory Right in Instrument Panel, Gauges and Warning Indicators.
2. Remove the two retaining screws (1) from the passenger control switch and remove.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the passenger control and screws (1) into the trim plate.

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

2. Install the IP trim plate. Refer to Trim Plate Replacement - IP Accessory Right in Instrument Panel, Gauges and Warning Indicators.