SIR Steering Wheel Module Coil - Disassemble

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle (Column Shift) or Steering Column Trim Covers - Disassemble - Off Vehicle (Floor Shift).
2. Remove the wire harness assembly (1) from the wire harness strap (2)
3. Remove all the small wire harness straps.
4. Disconnect the inflatable restraint steering wheel module coil connector from the turn signal switch assembly connector.





5. Remove the retaining ring (3) from the groove in the steering shaft assembly (2).
6. Remove the inflatable restraint steering wheel module coil (4) from the steering shaft assembly (2).