Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENTREMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel.
4. Remove the upper and lower shrouds.
5. Remove the wire harness straps from the steering wheel column wire harness.
6. Remove the retaining ring (3).
7. Remove the inflatable restraint steering wheel module coil from the steering shaft (2).
INSTALLATION PROCEDURE
1. Install the inflatable restraint steering wheel module coil to the steering shaft (2).
2. Install the retaining ring (3).
3. Center the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Coil Centering - Off Vehicle (Column Shift And Floor Shift) for Steering Wheel and Column-Tilt in Steering.
4. Route the lower coil wire harness along the steering column jacket.
5. Install the wire harness straps to the steering column wire harness.
6. Install the upper and lower shrouds.
7. Install the steering wheel.
8. Install the inflatable restraint steering wheel module.
9. Enable the SIR System.