Brake Rotor Replacement-Rear

Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and the wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the caliper bracket. Refer to Brake Caliper Replacement-Rear.
4. Remove the brake rotor.
5. Clean the metal contact surfaces between the brake rotor and the hub bearing flange.

Installation Procedure
1. Install the brake rotor.
2. Install the caliper bracket. Refer to Brake Caliper Replacement-Rear.
3. Install the tire and the wheel. Refer to Tire and Wheel Removal and Installation.
4. Lower the vehicle.