Window Run Channel Replacement - Front Door

REMOVAL PROCEDURE




1. Remove the trim panel.
2. Remove the inner belt molding.
3. Remove the window.
4. Remove the push fastener from the upper rear corner of the B-pillar.
5. Pull the run channel (1) from the retainer.
Start at the B-pillar. Work around the window frame.

INSTALLATION PROCEDURE




1. Install the run channel (1) to the door window frame.
2. Install the B-pillar molded corner into the header and applique.
3. Press the push fastener into the hole in the B-pillar.
4. Install the molded corner at the mirror patch A-pillar.
5. Install the A-pillar below the belt extrusion into the front-door front-guide channel.
6. Install the window.
7. Install the inner belt molding.
8. Install the trim panel.