TCC PWM Solenoid Replacement

Removal Procedure





1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the oil pump. Refer to Oil Pump Replacement.
4. Remove the torque converter clutch PWM solenoid (325).

Installation Procedure





1. Install the torque converter clutch PWM solenoid (325).
2. Connect the transaxle wiring harness.
3. Install the oil pump. Refer to Oil Pump Replacement.
4. Install the case side cover. Refer to Case Side Cover Replacement.