Canister Purge Control Valve: Service and Repair

REMOVAL PROCEDURE
1. Note the position of the [1][2]EVAP hoses for installation.
2. Disconnect the electrical connector and hoses from solenoid.
3. Release the lock tab on the solenoid mounting bracket.
4. Remove the solenoid.

INSTALLATION PROCEDURE
1. Bend tab on mounting bracket to retain the EVAP purge solenoid valve.
2. Install the purge valve to the purge valve mounting bracket.
Once installed pull on the purge valve to ensure that the part will be held in place.
3. Connect the electrical connector and hoses to the purge valve.