General

The Driver Information Center (DIC) may be used to warn the driver of certain vehicle malfunctions and any required action. Warning messages are displayed by priority, with the higher priority messages displayed first. A list of messages follows. A complete list of messages with an analysis is provided in the diagnostic portion. An export ID# will accompany warning/status messages for non-US vehicles: Warning/status messages, when active, can be reset or removed from the display by pressing any one of the DIC buttons. Warning/Status messages may be superseded by personalization messages if they exist.
^ Warning messages:
- WINDSHIELD WASHER FLUID LOW
- ENG. COOLANT LOW CHECK LEVEL
- ENGINE OIL LOW CHECK LEVEL
- CHANGE ENGINE OIL SOON
- TRACTION CONTROL SYSTEM ACTIVE
- CHECK TIRE PRESSURES
- DOOR AJAR
- TRUNK AJAR

^ Cellular Telephone Status Messages (if equipped), the cellular telephone status is displayed by the instrument cluster as listed below where ### indicated the cellular telephone received signal strength:
- CEL-PHONE ### INCOMING CALL
- CEL-PHONE SYSTEM NO SERVICE
- CEL-PHONE ### ROAM B
- CEL-PHONE ### ROAM A
- CEL-PHONE ### ON
- CEL-PHONE ###CALL TIMER XX:YY

The instrument cluster may also display phone numbers stored in the cellular telephone's memory, associated alpha-tags and digit dialing. Cellular telephone displays, when active, cannot be reset or removed from the display. Cellular telephone displays may be superseded by warning/status messages if they exist.
^ Personalization Status Messages, the Driver Information Center may be used to allow the driver to customize various vehicle features through the personalization displays. Personalization messages are displayed in a predetermined order. Initial messages will provide instructions on how to use the system followed by the actual customize selection messages. A list of messages follows. A complete list of messages with an analyze is provided in the diagnostic portion of this section. An export ID# will accompany the instructional messages for non-US vehicles:
- WELCOME TO BUICK OPTION FEATURE DRIVER #
- ARMREST BUTTON CHANGES DRIVER #
- PRESS ENG/MET TO SELECT OPTION
- PRESS RESET TO GOTO NEXT CHOICE
- AUTO DOOR LOCKS OFF ON
- UNLOCK IN PARK OFF ON
- DELAYED LOCKING OFF ON
- LOCK FEEDBACK OFF ON
- LOCK FEEDBACK LIGHTS LIGHTS+HORN
- UNLOCK FEEDBACK OFF LIGHTS
- PERIMETER LIGHTING OFF ON
- SEAT RECALL OFF ON
- RECALL POSITION MEMORY EXIT
- OPTION FEATURE SELECTION DONE

Personalization messages, when active, can be removed from the display by pressing either the ODO/TRIP, FUEL INFO or GAGE buttons. Personalization displays may be superseded by driver identifier messages if they exist.
^ Driver Identifier Messages, the DIC may be used to indicate the current driver # of the vehicle. This information is displayed at each ignition cycle and is part of the vehicle personalization functions. Actual customer names can be programmed into the instrument cluster to appear in the driver # display for added convenience. A list of messages follows. A complete list of messages with an analysis is provided in the diagnostic portion. An export ID# will accompany the driver identifier messages for non-US vehicles:
- DRIVER #1
- DRIVER #2
- UNKNOWN DRIVER

Driver identifier messages. when active, cannot be removed from the display. Driver identifier displays cannot be superseded by any other messages.