Wiper Blade Assembly Replacement

Wiper Blade Assembly And Element Replacement:

Remove or Disconnect
1. If wiper arm assembly (8) has not been removed, run wiper arm and blade assembly to mid-wipe position.
2. Lift blade retaining latch.
3. Blade assembly (11) from arm assembly.

Install or Connect

Important
^ Use only 19-inch beam-type blade assemblies.
^ Blade assemblies must be installed with blade retaining latch pointed toward driver side of vehicle.

1. Blade assembly (11) on arm assembly (8).
2. Park wipers if at mid-wipe position.