Torque Converter: Service and Repair

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.





2. Transaxle converter cover bolts and cover.
3. Mark relationship of converter to flywheel.





4. Three bolts attaching converter to flywheel.

INSTALL OR CONNECT
1. Bolts attaching converter to flywheel.

Tighten
^ All bolts to 62 Nm (46 ft. lbs.). Re-torque the first bolt after all three have been tightened.

2. Converter cover and attaching bolts.

Tighten
^ Bolts to 13 Nm (115 inch lbs.).

3. Lower vehicle.