Transaxle Side Seals

^ Tools Required:
- J 34115 Axle Seal Installer
- Or Equivalent

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Drive axle.
3. Pry out seal with a screwdriver or other suitable tool.
^ Do not damage seal bore.

INSTALL OR CONNECT
1. New seal using J 34115. Lubricate seal lip with a light wipe of transmission oil.

Important: Carefully guide axle shaft past lip seal. Do not allow shaft splines to contact any portion of the seal lip surface, otherwise damage to the seal will occur.

2. Drive Axle.
3. Lower vehicle.

Inspect
^ For leaks.
^ Oil level.