Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check RH Rear Power Distribution Center Fuse Block #1 I/P 1 Fuse by visual inspection.
2. Make sure that G202 is clean and tight.
3. If the vehicle is equipped with Memory Mirrors, refer to Memory Seat/Mirrors. Seats
4. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections.
5. Check for broken (or partially broken) wire inside of the insulation which could cause a system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
6. Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.