Instrument Panel Cluster Replacement

Description:

Remove or Disconnect
1. Upper trim pad.
2. Cluster trim plate.
3. Knee bolster.
4. Disable SIR.
5. Steering column upper mounting nuts.
6. Steering column side support braces.
7. Loosen lower mounting nuts.
8. Apply light downward pressure to steering column.
9. Electrical connections
10. Remove Cluster

Install or Connect
1. Apply light downward pressure to steering column.
2. Cluster to I/P.
3. Electrical connections.
4. Steering column to I/P nuts.
5. Lower column nuts.
6. Knee bolster.
7. Cluster trim plate.
8. Upper trim pad.
9. Enable SIR.