Compressor Replacement

Compressor Mounting:

Tool Required:
J 39400 ACR4 Machine

Remove or Disconnect

^ Recover refrigerant from A/C system.
1. Accessory drive belt.
2. Raise and support vehicle.
3. Splash shield.
4. Electrical connector from compressor.
5. Electrical connector from A/C pressure switch.
6. Suction/discharge refrigerant hose assembly from rear of compressor.
7. Front compressor mounting nuts.
8. Bolt from rear of compressor.
9. Compressor.

Install or Connect

1. Compressor.
2. Mounting nuts and bolt.

Tighten
^ Compressor mounting nuts 50 N.m (37 lb. ft.).

3. Bolt to rear of compressor.

Tighten
^ Compressor mounting bolt to 100 N.m (74 lb. ft).

4. Suction/discharge refrigerant line assembly to rear of compressor.

Tighten
^ Bolt to 30 N.m (22 lb. ft.).

5. Electrical connections to compressor.
6. Electrical connection to A/C pressure switch.
7. Splash shield.
8. Lower vehicle.
9. Accessory drive belt.
^ Evacuate, charge and leak test A/C system.