Supercharger Removal

1. Remove the Ignition Control Module (ICM) harness from the fuel rail.
2. Remove the spark plug wire clips from the supercharger.
3. Remove the vacuum line from the fuel rail.
4. Remove the fuel rail nuts.
5. Remove the fuel rail.
6. Remove the booster bypass nut.
7. Remove the regulator valve and the harness bolt.
8. Remove the boost solenoid bolts.
9. Remove the bolts from the vacuum block.
10. Remove the MAP sensor bracket bolts.
11. Remove the TBI nuts.

NOTE: The location of the spacers and the bolts sizes in order to aid in installation.

12. Remove the bolts, spacers, and the stud from the supercharger.
13. Remove the supercharger.
14. Remove the supercharger gasket.