Crankshaft Balancer Removal

TOOLS REQUIRED
^ J 37096 Flywheel Holding Tool
^ J 38197 Crankshaft Balancer Puller
^ Or equivalents

PROCEDURE
1. Use the J 37096 in order to hold the flywheel.
2. Remove the balancer bolt.

CAUTION: Do not separate the pulley from the balancer. Service the pulley and the balancer as an assembly.

3. Use the J 38197 in order to remove the crankshaft balancer.
a. Invert the J 38197-2 so that the leg of the tool is facing away from the balancer.
b. Install the silver screws (J 38197-4) to the balancer.
c. Turn the J 38197-1 in order to remove the balancer from the crankshaft.
d. Remove the J 38197-1, J 38197-2, and J 38197-4 from the balancer.