Installation Precautions

WARNING: Before removing or Installing any electrical unit, or when a tool or equipment could easily come In contact with "live' or "hot all the times' exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components. Unless Instructed otherwise, the Ignition switch must be In the OFF or LOCK position.

The following information on engine service should be noted carefully, as it is important in preventing damage and contributing to reliable engine performance.
^ When raising or supporting the engine for any reason, do not use a jack under the oil pan. Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump screen resulting in a damaged oil pickup unit.
^ Anytime the port fuel injection assembly or air cleaner is removed, the intake opening should be covered. This will protect against the accidental entrance of foreign material which should follow the intake passage into the cylinder and cause extensive damage when the engine is started.