Instrument Panel Accessory Trim Plate Replacement

Instrument Panel Trim Plate:

Remove or Disconnect
1. Screws from instrument panel accessory trim plate.
2. Pull instrument panel accessory trim plate rearward to release two steel retainers.
3. Rotate instrument panel accessory trim plate rearward and up to release two tabs at top edge.
4. Instrument panel accessory trim plate from instrument panel.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Align instrument panel accessory trim plate to instrument panel.
2. Tabs into instrument panel retainers.
3. Rotate instrument panel accessory trim plate forward and press metal clips into retainers until fully seated.
4. Screws to instrument panel accessory trim plate.

Tighten
^ Screws to 2 Nm (18 lb.in.).