Warning Indicator Operation

NORMAL INDICATOR OPERATION
The standard brake system uses an single red BRAKE warning indicator located in the instrument panel cluster. The antilock brake system uses the same red BRAKE warning indicator, an amber ABS warning indicator, (ANTI-LOCK), an amber TCS warning indicator (TRAC OFF) and an amber ABS/TCS active indicator (LOW TRAC).

1. When the ignition is turned to the to RUN, position, the amber ABS warning indicator, the amber ABS/TCS active indicator, the ambler TCS warning indicaotr and red BRAKE warning indicator all turn on for approximately three seconds, then turn off.

2. As the engine is cranked, both the amber ABS warning indicator, the amber ABS indicator, the ambler TCS active indicator, the amber TCS warning indicator and red BRAKE warning indicator turn on and remain on.

3. After the engine is started, the amber ABS warning indicator, the amber ABS/TCS active indicator, the amber TCS warning indicator and red BRAKE warning will be on for approximately three seconds then turn off.

4. Anytime the Electronic Brake Traction Control Module (EBTCM) determines that the vehicle has entered a braking event where ABS or TCS is required, the ambler ABS/TCS active indicator (LOW TRAC) will turn on to indicate that ABS/TCS is active. The amber ABS/TCS active indicator (LOW TRAC) will remain on for approximately 3 to 4 seconds after the ABS/TCS event is completed.