Torque Converter: Service and Repair

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Converter cover bolts and cover.
3. Mark relationship of converter to flywheel.
4. Three bolts attaching converter to flywheel and discard.

INSTALL OR CONNECT
1. Bolts attaching converter to flywheel.
^ Tighten "NEW" bolts to 62 Nm (46 ft. lbs.).
2. Converter cover and attaching bolts.
^ Tighten bolts to 13 Nm (115 inch lbs.).
3. Lower vehicle.