Trim Plate

Description:

Remove or Disconnect
1. Reveal covers, by prying up and carefully pulling forward.
2. Fasteners.
^ Carefully pull up upper trim plate and remove sunload and twilight sentinel sensors by turning 1/4 turn.
3. Upper trim plate.

Install or Connect
1. Sunload and twilight sentinel sensors to the upper trim plate.
^ Install by inserting and turning 1/4 turn.
2. Upper trim plate.
3. Fasteners.

Tighten
^ Fasteners to 1.9 Nm (17 lb. in.).

4. Reveal covers.