DTC 32

TEST CONDITIONS: The Control Module will monitor the lateral accelerator switch signal for invalid voltage levels.

FAULT CONDITIONS: If lateral accelerator switch voltage is too high or too low, set code.

ACTION TAKEN: Record lateral accelerator switch error, Turn on both driver select switch Light Emitting Diodes (L.E.D.'s). Disable lateral accelerator switch input until valid voltage level is detected.

DESCRIPTION: A lateral accelerator switch error occurs when the lateral accelerator switch signal is short-circuited to B+ or ground, or the lateral accelerator switch is open-circuited or disconnected. Recovery occurs upon detection of valid lateral accelerator switch input voltage.