Torque Specification and Tightening Sequence

Tighten the cylinder head bolts in sequence on the first pass to 30 Nm (22 lb ft).

Use the J 36660 in order to tighten the cylinder head bolts on the second pass.

^ Tighten the short bolts (3, 4, 7, 8, 11, 12, 15, 16) 55 degrees.
^ Tighten the medium bolts (14, 17) 65 degrees.
^ Tighten the long bolts (1, 2, 5, 6, 9, 10, 13) 75 degrees.