Accelerator Pedal: Service and Repair

Accelerator Pedal Assembly:

REMOVE OR DISCONNECT
1. Lower instrument panel trim attaching screws, retaining nut and lower instrument panel trim.
2. Accelerator cable from accelerator pedal.
3. Accelerator pedal fasteners and accelerator pedal.

NOTICE:
The mounting surface between support and dash panel must be free of insulation. The carpet and padding in pedal and tunnel area must be positioned to lay flat and be free of wrinkles and bunches.

INSTALL OR CONNECT
1. Accelerator pedal with attaching fasteners.
2. Accelerator cable on accelerator pedal.

Inspect
Check for complete throttle opening and closing positions by operating accelerator pedal. Also check for proper carpet fit under the accelerator pedal. Throttle should operate freely without bind between full closed and wide open throttle.

3. Lower instrument panel trim.