Windshield - Squeak at the Base
Group Ref.: 8 - Chassis/Body ElectricalBulletin No.: 438305
Date: June, 1994
SUBJECT:
SQUEAK AT BASE OF WINDSHIELD
(REMOVE 4 mm OF MATERIAL FROM I/P)
MODEL:
1994 BUICK ROADMASTER
CONDITION:
Some owners may comment on a squeak at the base of the windshield.
CORRECTION:
Remove 4 mm of material from the I/P by using the following procedure:
1. Remove instrument panel pad. (Refer to Service Manual procedure.)
2. Carefully measure 4 mm from leading edge (next to windshield) and mark a line on the panel. (See Figure 1.)
3. Using a utility knife, cut on marked line through foam pad scoring the hard plastic substrate. Remove cut foam exposing scored line.
4. Using a saw type tool, cut along scored line.
5. Reinstall instrument panel pad and any other previously removed parts.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use: