Troubleshootings Hints - Reclining Seats

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:

IMPORTANT: To avoid misdiagnosis, inspect mechanical linkage for binding which would prevent smooth operation or cause system failure.

^ Substitute I/P Circuit Breaker #3 with one of equal value (30 amp) known to be operational.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer Diagnostic Aids. Diagnostic Aids
^ Refer to System Diagnosis. System Diagnosis - Reclining Seats