With Keyless Entry

All Door Locks operate the same as without Keyless Entry except the LH Door Lock. When either Door Lock Switch is moved to the "LOCK" position, the Power Door Lock Relay is energized and voltage is applied to the GRY wire and to the Door Lock Motors. The LH Front Door Motor is grounded through the Key less Entry Receiver terminal "B". The other Door Lock Motors are grounded through the normally open contacts of the Unlock Relay. When either Door Lock Switch is moved to the "UNLOCK" position, voltage is applied to terminal "G" of the Keyless Entry Receiver. This is the Unlock Enable signal that tells the Keyless Entry Receiver to energize terminal "B", which then applies voltage to CKT 294 and to the LH Front Door Lock Motor. The LH Front Door Lock Motor is then grounded through the normally open Lock Relay contacts of the Power Door Lock Relay.