Rear Door

REAR DOOR WINDOW ADJUSTMENT







IMPORTANT: Do not let window come out of run channel during adjustment. The following procedure is only to correct a misaligned window.

1. Remove trim panel and upper part of water deflector.
2. Lower glass 2 inches.
3. Loosen sash nuts and front channel assembly upper bolt. Slide forward in sash slots.
4. Power window up. Pry up sash with large flat-bladed tool at front and rear.
5. Tighten sash nuts and front channel assembly upper bolt.

IMPORTANT: If glass is not penetrating into upper part of B-pillar:
^ Loosen rear sash nut.
^ Drop glass down 1 inch.
^ Retighten right rear sash nut (glass should be tipped forward).