Door Hinge Description

The door hinges are made of steel and are welded to the door and bolted to the body hinge pillars. Because of the welds, there are no door adjustment provisions. However, a removable hinge pin has been provided for the removal of the door. assembly from the body. The solid steel hinge pin has a barrel type retaining clip and serrated shank near the head which provides a friction fit with the mating surface on the hinge. All hinge straps have holes to permit bolt-on installation into tapped anchor plates. Tapped anchor plates must be used instead of nuts and washers to insure structural integrity when replacing a hinge assembly. No service welding is required. when replacing front door hinge straps. The front door upper and the rear door lower hinge have an integral two stage hold-open feature. Door side and body side hinge straps, hinge pins, tapped anchor plates, hinge bolts and bushings are available as separate service parts.