Striker Plate

Interlock Assembly:

Remove or Disconnect

1. Position door glass fully down.
2. Cover (8).
3. Nut (9) and guide loop (7).
4. Two screws (4), plate (5), and seal (6).

Install or Connect

1. Seal (6).
2. Plate (5) with two screw (4).
3. Guide loop (7) with nut (9).
4. Close door slowly and check for proper alignment.

Tighten
^ Screw (4) to 3.5 N.m (31 lbs. in.).
^ Nut (9) to 22-30 N.m (16-22 lbs. ft.).

5. Cover (8).