Pump Cover, Assemble

1. Install pressure relief ball, spring and rivet.

2. Install inner and outer converter clutch valve springs.

3. Install converter clutch valve, valve stop, then the retaining ring.

4. Install pressure regulator valve into pressure regulator bore.

5. Install pressure regulator spring.

6. Install TV boost valve into TV bushing, with long land of valve into large hole of bushing. Retain with Transjel.

7. Install reverse boost valve into reverse boost bushing, with small end first. Retain with Transjel.

8. Install reverse boost valve sleeve into pressure regulator bore.

9. Install TV boost valve sleeve into pressure regulator bore, then the retaining ring.