Locks - Revised Illuminated Cylinder & Assembly Removal

9225buick01

Bulletin: 89-10-25

Date: Sept., '89

Ref. No.: 89-217-10

Corp. Ref. No.: 931041


SUBJECT:
SERVICE MANUAL UPDATE, SECTION 10 ILLUMINATED LOCK CYLINDER AND LOCK ASSEMBLY

MODELS AFFECTED:
1989-90 REGALS

This bulletin is being issued to update replacement procedures for the illuminated lock cylinder and lamp assembly.

REMOVE OR DISCONNECT





Figures 1 and 2

1. Door handle cover assembly. Refer to DOORS (Section 10-5) in the Service Manual.
2. Lock cylinder to lock rod.
3. Screw securing lock cylinder to door.
4. Lock cylinder and spacer.
5. Theft deterrent shield.
6. Door trim panel. Refer to DOORS (Section 10-5) in the Service Manual.
7. Connector
8. Lamp assembly and harness from door.

Install or Connect

1. Lamp assembly and harness to door.
2. Connector.
3. Door trim panel. Refer to DOORS (Section 10-5) in the Service Manual.
4. Theft deterrent shield.
5. Spacer and lock cylinder.
6. Screw

- Tighten
- Screw to 10 N-m (89 lb.in.)

7. Lock cylinder to lock rod.
8. Door handle cover assembly. Refer to DOORS (Section 10-5) in the Service Manual.