54 10 1... Removing and Installing or Replacing Outer Gaiter For Glass Tilt Sunroof

54 10 1... Removing and installing or replacing outer gaiter for glass tilt sunroof

Special tools required:







IMPORTANT:
Handle the gaiter with extreme care throughout the entire procedure.
Soft component is highly susceptible to tearing.







Necessary preliminary tasks:
- Remove trim strip on roof frame
- Remove inner gaiter







Unlock and remove clip (1).

Installation note:
Firstly install gaiter on glass tilt sunroof cover.







Lever out gaiter (1) from glass tilt sunroof cover (2) downwards with special tool 00 9 317.

Installation note:
If necessary, replace faulty gaiter.
Install gaiter on glass tilt sunroof cover from rear to front.