Rear

Caution: Read and comply with General Data, refer to Brakes and Traction Control, Description and Operation.

Remove rear wheel.

Open plug housing (1).

Remove plug connection (2) from fixture and disconnect.

Pull cable out of fixture (3).

Installation: Ensure proper locking of the plug connector and proper seating of the cable in the brackets.

Pull cable out of fixtures.

Installation: Ensure proper seating of cable in fixtures.

Release hexagon-socket-head cap screw.

Withdraw ABS pulse generator from bore.

Installation:
Clean hole for pulse generator and grease with lubricating grease Staburags NBU 12/K.

Tightening torque: 8 Nm