Removing and Installing/Replacing Additional Stop Light

Removing And Installing/Replacing Additional Stop Light







Pull off seal (1) in area of trim of rain gutter at rear center (2).
Remove expansion rivets.
Remove trim of rain gutter at rear center (2) in direction of arrow.







Unclip cable.
Detach plug connection (1) in direction of arrow and disconnect.
Release screws (2) and (3).

Installation:
Note different screw lengths.
- Screws (2) = long
- Screws (3) = short







Unclip rear window frame (1) on left and right and remove in direction of arrow.

Installation:
If necessary, replace faulty clips.







Unclip cable (1).
Loosen screws (2).
Remove additional brake light (3) in direction of arrow.