Disassembly and Assembly

(cylinder head removed)

Remove exhaust manifold.





Secure special tool 11 1 065 to special tool 00 1 490.
Provide special tools for disassembly of cylinder head:
- Special tool 11 1 071
- Special tool 11 1 067
- Special tool 11 0 192





Note: New valve spring as of 9/97!
With the new valve spring, use special tool 11 0 345 instead of special tool 11 0 341.
- Special tool 11 1 045
- Special tool 11 0 341
- Special tool 11 0 342
- Special tool 11 0 343
- Special tool 11 0 180
Assemble special tools.





Note: Do not install special tool 11 0 180 (locating board) in special tool 11 1 065 at this stage.





Add special tool 11 1 065 to special tool 11 1 072.





Caution: Do not damage sealing surface.
If necessary, cover special tool 11 1 065 with plastic sheeting. Place cylinder head with exhaust side facing front right on special tool 11 1 065 and secure with two cylinder head bolts.

Remove camshaft.
This task is described in the work step "Removing left/right camshafts", refer to Camshaft, Lifters and Pushrods.
Remove all valve springs.
Remove all valve stem seals.
Remove all valves.