Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Campaign - DME/ECM Computer Reprogramming
• Customer Interest
  • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
    • Overview
    • Attachments
      • E36
      • E38 and E39
      • E46
      • E53
      • Z3
  • Fuel System - MIL ON, Tank Leakage Fault Codes
  • Brake - Light heck Warning On After Recoding LCM
  • A/C System - Cuts Out on Light Acceleration
  • Engine - Cranks, But Will Not Start, Fault Codes Set
  • A/C Controls - Blows Warm Air On Light Acceleration
  • ECM - Secondary Air Pump Circuit Rewiring
  • Brakes - ASC MIL ON No Codes Set
• By Symptom
  • Customer Interest
    • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
      • Overview
      • Attachments
        • E36
        • E38 and E39
        • E46
        • E53
        • Z3
    • Fuel System - MIL ON, Tank Leakage Fault Codes
    • Brake - Light heck Warning On After Recoding LCM
    • A/C System - Cuts Out on Light Acceleration
    • Engine - Cranks, But Will Not Start, Fault Codes Set
    • A/C Controls - Blows Warm Air On Light Acceleration
    • ECM - Secondary Air Pump Circuit Rewiring
    • Brakes - ASC MIL ON No Codes Set
  • Erratic Operation
    • Engine - Cranks, But Will Not Start, Fault Codes Set
    • A/C Controls - Blows Warm Air On Light Acceleration
  • False instrument warning light/gauges
    • Brake - Light heck Warning On After Recoding LCM
  • Recalls
    • Campaign - DME/ECM Computer Reprogramming
  • Starting problems
    • Engine Cranks, But Does Not Start, Fault Codes Set
    • Engine - Cranks, But Will Not Start, Fault Codes Set
• All Technical Service Bulletins
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Computers/Controls - ISTA Test Plan Priority Error Info.
  • Computers/Controls - ISTA/D DTC S0001 After Quick Delete
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • Engine Controls - Updated DISplus/GT1 Software
  • Computers/Controls - 'Retrofit' Update Programming
  • Engine Controls - Various Driveability Complaints
  • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
    • Overview
    • Attachments
      • E36
      • E38 and E39
      • E46
      • E53
      • Z3
  • Engine Controls - Progman(R) V22.1/V22.1.1 and V22.1.2
  • Computers/Controls - Progman(R) V22.0/V22.0.1 Errors
  • Engine Controls - Progman(R) V21.01 and V21.02.01 Errors
  • Engine Controls - Progman(R) V21.0 Software Errors
  • Engine Controls/Emissions - OBD Readiness Code Setting
  • Catalytic Converter - Unnecessary Replacements
  • Evap. Emission Control - Fuel Filler Cap/Door Labels
  • Fuel System - MIL ON, Tank Leakage Fault Codes
  • Computers/Controls - Custom Configuration
  • Special Tools - DSCIII Test Cable
  • Brake - Light heck Warning On After Recoding LCM
  • A/C System - Cuts Out on Light Acceleration
  • Engine Cranks, But Does Not Start, Fault Codes Set
  • Engine - Cranks, But Will Not Start, Fault Codes Set
  • A/C Controls - Blows Warm Air On Light Acceleration
  • Engine Control Modules - Programming Hints
    • Overview
    • Correction
  • ECM - Secondary Air Pump Circuit Rewiring
  • ECM - Reprogramming W/P16.0 Version Software
  • Campaign - DME/ECM Computer Reprogramming
  • DME - Diagnostic Error Message Displayed
  • Engine Control Module - MS 43 Removal Precautions
  • Brakes - ASC MIL ON No Codes Set
  • Check Engine Lamp ON/DTC's Stored