Front Impulse/Speed Sensors

Caution: Note "General Data", found in Brakes and Traction Control, Description and Operation.





Open connector housing, pull plug connector out of bracket and disconnect.
Pull cable with rubber grommet out of bracket on spring strut.

Installation:
Ensure proper locking of plug connector and proper seating of rubber grommets.





Unfasten socket head cap screws (1) and pull cable out of bracket on spring strut. Pull ABS impulse sensor out of hole.

Installation:
Clean hole for impulse sensor and grease with lubricating grease Staburags NBU 12/K.