Replacing All Right Ignition Leads (M73)

Replacing All Right Ignition Leads (M73)







Press interlock (2) and remove connector (1).







Open clips (1).
Unfasten hose clip (2) from auxiliary hose for air pump. Pull off hose.
Disconnect plug-in connection (3).
Release hose clamp (4) withdraw hose.
Remove upper section of suction filter housing style with mass air flow sensor.







From model year 1998:
Pull air hose (1) off air intake hose (2)







From model year 1998:
Unclip air hoses (1 and 2) from bracket (3).







Unclip diagnosis connector from bracket.







Unfasten screw connection for ignition wiring harness (1) from manifold.
Remove spark-plug connectors.







Unfasten cable tie on protective cap for distributor cap.
Unfasten clips (1 to 3) and remove protective cap for distributor cap.







Note sequence of ignition leads on the distributor cap and remove the distributor cap.

Installation:
When fitting ignition leads, note firing order.

Firing order, refer to Technical Data.
Electrical Specifications