Removing and Installing / Replacing Radio Receiver (with Board Monitor)

Removing And Installing / Replacing Radio Receiver (with Board Monitor)

The following parts must be removed first:
- Video module.
- If necessary, HIFI amplifier.
- Bracket for video module and amplifier (HIFI)
- Insulating mat on rear left side panel




Unfasten screws. Remove receiver with bracket.

Installation:
Use the correct screw length. Screws are 12 mm long and have washers of (10 mm). All other screws are 14 mm long and have washers of (15 mm).




Pull off connectors. Release screw and detach receiver from bracket.