Replacing Radial Oil Seal for Torque Converter

Replacing radial oil seal for torque converter (transmission removed)





Carefully remove torque converter from oil pump with special tool 24 4 000 (assembly handles).

Caution: Escaping ATF.





Unscrew Torx bolts with a Torx socket.
Extract radial seal with special tool 00 5 010 (extractor)
Place a suitable pressure piece (1) on the input shaft on which the pressure bolt can bear.





Lubricate sealing lip with ATF.
Install radial oil seal.
Tightening torque: 3 Nm.