Defect Code 41

Defect Code 41:

*D* Defect code memory: 41 Acceleration signal rear axle (vertical):

Troubleshooting: Check wire and repair if necessary: From EDC relay connector X 18068 to the acceleration sensor. If wire OK, measure volt- age at the EDC
relay:

Is a voltage of 12 V applied?

If yes, check acceleration sensor and renew if necessary. (For check, please refer to defect code 30).

If no, check wire from EDC relay to connector X 299 and repair if necessary. If defect has still not been rectified, renew EDC relay.