Removing and Installing Throttle Housing

REMOVING AND INSTALLING THROTTLE HOUSING





- Disconnect cables (1 .. 3).
1 = Automatic transmission
2 = Accelerator pedal
3 = Cruise control

Installation Note:
- Adjust cables.





- Loosen hose clamp (1) and push back hose (2).
- Pull off plug (3) on throttle switch.





- Unscrew screws (1...4).
- Take off throttle housing.
- 5 = Gasket

Installation Note:





- Replace gasket (1)





- Unscrew bolts (1 and 2).
- Take off throttle switch.

Installation Note:
- Adjust throttle switch 13 63 544.
- Connect vacuum hoses again.
- Check engine idle speed and CO.