Removing and Installing Throttle Housing

REMOVING AND INSTALLING THROTTLE HOUSING





- Disconnect cables (1 .. 3).
1 = Automatic transmission
2 = Accelerator pedal
3 = Cruise control

Installation Note:
- Adjust cables.





- Disconnect water hoses (1 and 2).
- Disconnect air hoses (3 and 4).

Installation Note:
- Filling and bleeding cooling system.





- Disconnect hose (3).
- Pull off multiple pin plug (4) on throttle switch.





- Unscrew nuts (1...4) and take off throttle housing.

Installation Note:





- Replace gasket (1)





- Unscrew bolts (1)
- Remove throttle switch (2)

Installation Note:
- Adjust throttle switch 13 63 544.





- Unscrew bolts (1) and take off cover (2).

Installation Note:





- Replace gasket.
- Check engine idle speed and CO.