Front Parking Aid Sensors, Sedan and Avant, Through MY 2012

Front Parking Aid Sensors, Sedan and Avant, through MY 2012

Removing






Outer Sensor

- Remove the front wheel housing liner.

- Press both retainer tabs to the side - arrows - and press the sensor - 2 - through from the outside towards the inside.

- Disconnect the electrical connector - 1 - on the sensor.

• It is necessary to remove the front bumper if the left front sensor cannot be removed as described, depending on the vehicle equipment.

Inner Sensor






- Reach through the opening in the radiator grille behind the mounts and press both retaining tabs to the side - arrows - while pressing the sensor - 2 - through from the outside to the inside.

- Disconnect the electrical connector - 1 - from the sensor.

Installing

Install in reverse order of removal, observing the following:

Outer Sensor

- Install the front wheel housing liner.