Bonded Rubber Bushing at Front Housing, Pulling Out and In

Bonded Rubber Bushing at Front Housing, Pulling Out and In

Special tools, testers and auxiliary items required

• Thrust piece (VW 442)

• Sleeve (30 - 14)

• Alignment fixture (3301)

• Alignment fixture (3346)

• Alignment fixture (3347)

• Thrust pad (VW 512)

• Thrust piece (VW 554)

• Alignment fixture (3253)

• Alignment fixture (T10030)

- Pull out bonded rubber bushing.





It is important to grease spindle (3346/2) with Molybdenum grease before using.

- To do so, place special tool (3346/1) with flat shoulder facing toward bonded rubber bushing onto the spindle (3346/2).

- Pull in bonded rubber bushing - A - until it is centered in front final drive housing.