Daytime Running Lamp and Parking Lamp LED Modules L176 and L177

Daytime Running Lamp and Parking Lamp LED Modules L176 and L177

Removing

- Switch vehicle ignition off

- Disconnect the battery ground (GND) cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Right side of the vehicle: Remove the air filter housing.

- Open the clip - 2 - in the direction of the - arrow -.






- Move the housing cover - 1 - to the side and remove it.

- Remove the screws - 2 - and - 4 - and remove the LED module - 3 - from the mount.






- Squeeze the clips in the direction of the - arrows - and disconnect the LED module connector - 1 -.

Installing

• Tightening specification, refer to=> [ Bi-Xenon Headlamps with Cornering Light Overview ] Bi-Xenon Headlamps With Cornering Light Overview.

Install in reverse order of removal, observing the following:

- Close housing cover and secure with clip.

- Right side of the vehicle: Install the air filter housing.

- Connect battery. Required actions, refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.