Sill Panel and Rear Center Armrest Lamps and Switches

Left and Right Rear Multi-Contour Seat Switch

Removing






- Remove the Rear A/C display control head (E265).

- Remove the upper trim from the rear center armrest.

- Remove the Multimedia Control Head 2 (E499) , if equipped.

- Remove the clamps - arrows - from the center armrest - 2 - and remove the control head - 1 -.

- Disconnect the electrical connector.

Installing

Install in reverse order of removal, observing the following:

• Check the clips for damage and replace them if necessary.

- Install the multimedia control head 2.

- Install the upper trim from the rear center armrest.

- Install the Rear A/C display control head.